Apple III : Won't Boot AII Disk Calibrate in AII Emulation

Apple III : Won't Boot AII Disk Calibrate in AII Emulation

PROBLEM DESCRIPTION:  Apple II Disk Calibration Program will not
boot on the Apple III in Apple II Emulation mode.
 
 
CAUSE:  Peripheral cards may be interfering with the Apple II Disk
Calibration program.

	
CURE:  Power down the Apple III and remove ALL interface cards,
(especially the ProFile interface card).  Reboot the Apple II
Emulation Disk then load and run the Apple II Disk Calibration
Program.
 
 
If this cure does not resolve the problem, go back to the Word Search
screen and search on the product's name and HTS and GTS to obtain a
General Troubleshooting procedure. 

Back